LCD Screen
Posted: Sat Mar 28, 2009 8:48 amHow do I wire the LCD screen?
Do I just solder the wires to the pins1-16?
Do I just solder the wires to the pins1-16?
www.megadrum.info
MegaDrum Forums
http://miumiuonestop.megadrum.info/forums/
LCD Screen
http://miumiuonestop.megadrum.info/forums/viewtopic.php?f=3&t=646
Page 1 of 1
Posted: Sat Mar 28, 2009 8:48 amRe: LCD Screen
Posted: Sat Mar 28, 2009 11:19 amI figured out how my wires ran in the IDE cable that I cannibalized by using a continuity tester. Then I checked to make sure the pinout on my lcd was the same as the order in the schematic. Those must correspond. Mine were in order, pin 1 was pin 1 on the board, etc. HERE pin 1 is the pink wire on mine.