Atmega644. After last update firmware megadrum_20140809 hihat not work properly. As input 2 no sound (only full open sound), but as 4,6,8... etc. sound work, but other pad depending on the choose input work as hihat.
Sorry my english.
hihat input problem
3 posts
• Page 1 of 1
hihat input problem
by sly1974 » Thu Sep 11, 2014 1:18 pm
- sly1974
- Posts: 27
- Joined: Thu Mar 24, 2011 12:16 pm
Re: hihat input problem
by dmitri » Thu Sep 11, 2014 3:55 pm
Did you check BowSO/EdgeSO/BellSO, BowHO/EdgeHO/BellHO, BowSCL/EdgeSCL/BellSCL and BowCL/EdgeCL/BellCL un Pedal settings?
- dmitri
- Site Admin
- Posts: 8739
- Joined: Fri Aug 03, 2007 8:05 pm
Re: hihat input problem
by sly1974 » Fri Sep 12, 2014 6:49 am
Works. I load the settings from the previous firmware, in which everything worked properly, but it seems that I have to do some settings again.
- sly1974
- Posts: 27
- Joined: Thu Mar 24, 2011 12:16 pm
3 posts
• Page 1 of 1